TETS RebarX

GFRP Rebar Price List India 2026: Per Kg & Per Metre (6–32mm)

Quick answer: In 2026, GFRP rebar in India typically sells for ₹140–₹300 per kg (ex-GST and freight), depending on diameter, resin system, quantity and whether the bars are straight or factory-bent. Because GFRP weighs about one-quarter as much as steel, it is usually quoted per metre. A 12mm GFRP bar costs roughly ₹33–₹71 per metre, compared with about ₹58–₹71 per metre for 12mm TMT steel.

GFRP Rebar Price List India 2026 (Per Metre and Per Kg)

DiameterGFRP weight (kg/m, approx.)GFRP price per metre (indicative)TMT steel weight (kg/m)TMT price per metre (₹65–80/kg)
6 mm0.059₹8–₹180.222₹14–₹18
8 mm0.106₹15–₹320.395₹26–₹32
10 mm0.165₹23–₹500.617₹40–₹49
12 mm0.238₹33–₹710.888₹58–₹71
16 mm0.422₹59–₹1271.58₹103–₹126
20 mm0.660₹92–₹1982.47₹161–₹198
25 mm1.031₹144–₹3093.85₹250–₹308
32 mm1.689₹236–₹5076.31₹410–₹505

GFRP weights are calculated at ~2.1 g/cm³ and vary ±5–10% with sand coating and resin content. Prices are indicative market ranges, excluding 18% GST and transport. Request today’s TETS RebarX price for your diameter and quantity.

Why GFRP Is Priced Per Metre, Not Per Kg

Steel buyers in India are used to comparing rates per kg or per tonne. That comparison makes GFRP look 2–4 times more expensive. But you buy reinforcement by length, not weight. A 12mm GFRP bar weighs about 0.24 kg/m against 0.89 kg/m for 12mm TMT, so per running metre the two materials are much closer in price than the per-kg rate suggests.

What Changes the GFRP Rebar Rate

  • Diameter: the per-kg rate is usually higher for small diameters (6–10mm) because of slower production per kg.
  • Quantity: truckload orders get noticeably better pricing than small retail lots.
  • Resin system: vinyl ester bars cost more than polyester or epoxy blends but perform better in alkaline and marine exposure.
  • Bends and stirrups: GFRP cannot be bent on site, so factory bends, rings and stirrups are priced separately.
  • Compliance and testing: bars supplied with IS 18256:2023 or ASTM D7957 test reports carry a quality premium.
  • Freight: light weight means more metres per truck, which lowers transport cost per metre for long distances.

Price Example: 100 m² House Slab

A typical residential slab detailed with 10mm bars at 150mm spacing both ways needs roughly 1,400 running metres of bar. At ₹23–₹50 per metre that is about ₹32,000–₹70,000 in GFRP, versus roughly ₹56,000–₹69,000 in 10mm TMT at ₹40–₹49 per metre. The final design must follow ACI 440.1R or a structural engineer’s GFRP design, because GFRP’s lower stiffness can change bar size or spacing.

GFRP vs TMT: Total Cost, Not Just Material

Material price is only part of the cost. GFRP removes rust-proofing, cuts handling labour and lets designers reduce concrete cover in aggressive exposure. For coastal, chemical and water-retaining structures the life-cycle saving is usually larger than any upfront premium. See our GFRP vs TMT steel cost comparison for the full breakdown, and our 12mm GFRP rebar price guide for the most common size.

How to Get an Accurate GFRP Rebar Quote

  1. Share bar diameters and total running metres (or the bar bending schedule).
  2. List any bent shapes, stirrups or rings.
  3. Mention site location for freight.
  4. Ask for IS 18256 / ASTM D7957 test reports with the quote.

Get a factory-direct GFRP rebar quote from TETS RebarX →

Frequently Asked Questions

What is the price of GFRP rebar per kg in India?

Typically ₹140–₹300 per kg in 2026, ex-GST and freight. The rate depends on diameter, quantity, resin and bends.

What is the price of 12mm GFRP rebar per metre?

Roughly ₹33–₹71 per metre at current market rates, based on about 0.24 kg/m.

Is GFRP cheaper than steel?

Per kg, no. Per running metre for the same diameter, prices are often similar, and over the life of a structure exposed to moisture or chlorides GFRP is usually cheaper because it needs no corrosion repairs.

Is GST included in GFRP rebar prices?

Prices on this page exclude 18% GST and transport.